Top 9 Sprinkler Head Drip Adapter – Lawn & Garden Sprinklers

As an Amazon Associate I earn from qualifying purchases.

1. Rain Bird

#ad

Rain Bird RISMAN1S Drip Irrigation Riser Adapter Drip and Sprinkler Watering, 1/2" Female Pipe Thread x 1/2" Male Pipe Thread x 1/4" Barbed End

#ad
Rain Bird #ad - 1/2" female pipe thread fpt bottom inlet x 1/2" male pipe thread MPT top outlet x 1/4" barbed side outlet. Installs between 1/2" riser and sprinkler device. Add drip irrigation to any riser-mounted high-pressure sprinkler system. Constructed of highly durable UV and chemical-resistant materials to assure long life. Allows both irrigation methods to be used at once, covering all plants effectively.
BrandRain Bird #ad
ManufacturerRain Bird #ad
Height1.36 Inches
Length1.07 Inches
Weight0 Pounds
Width1.07 Inches
Part NumberRISMAN1S
ModelRISMAN1SM

2. One Stop Outdoor

#ad

One Stop Outdoor Drip Irrigation Riser Adapter Drip and Sprinkler Watering, 1/2" Female Pipe Thread x 1/2" Male Pipe Thread x 1/4" Barbed End 10

#ad
One Stop Outdoor #ad - Attaches to 1/2" riser - Simultaneously use sprinkler device & drip tubing. Drip irrigation adapter - Allows both types of irrigation methods to be used simultaneously, covering all plants effectively. 1/2" female pipe thread fpt bottom inlet x 1/2" male pipe thread MPT top outlet x 1/4" barbed side outlet. Constructed of highly durable UV and chemical-resistant materials to assure long life. Add drip irrigation to any riser-mounted high-pressure sprinkler system.
BrandOne Stop Outdoor #ad
ManufacturerOne Stop Outdoor #ad

3. Orbit

#ad

Orbit DripMaster 67030 2-Port Full-Flow Manifold

#ad
Orbit #ad - For outdoor use with cold water only. Saves water in drought conditions. Connects to a 1/2-inch threaded riser. Easily cuts up to 1/2-inch diameter vinyl, polyethylene, and rubber tubing. Two 1/4-inch barbed ports with threaded caps. Saves water in drought conditions. Converts shrub head to a drip watering system.
BrandOrbit #ad
ManufacturerOrbit #ad
Height5.75 Inches
Length1 Inches
Width3.5 Inches
Part Number15-8042
Model15-8042

4. Rain Bird

#ad

1800 Series Pop-Up to 6 Drip Emitters with 1/4" Tubing, Rain Bird CNV182EMS Drip Irrigation Sprinkler Conversion Kit

#ad
Rain Bird #ad - Waters flower beds, shrubs, and other garden plants with pinpoint accuracy. Kit converts a pop-up sprinkler spray head into a water-saving Drip emitter system. Replaces rain bird 1800 series without digging; other styles of pop-up sprinkler heads with 1/2" bottom inlet will require digging. Reduces water use up to 40% compared to spray irrigation; requires capping other heads in zone. Greatly reduces weed growth by watering only where you want and need it. Includes retro-fit conversion head with pressure regulator, filter and 6-port manifold.
BrandRain Bird #ad
ManufacturerRain Bird #ad
Height9 Inches
Length2.5 Inches
Weight0.7 Pounds
Width7.2 Inches
Part NumberCNV182EMT
ModelCNV182EMS

5. Orbit

#ad

Orbit 69000D 8-Port Drip Manifold with Adjustable Flow

#ad
Orbit #ad - Adjustable flow: Individually control the water flow to each port for precise output. Conserve water: use less water by converting shrub head watering to a drip irrigation system. Elbows rotate 360 degrees for easier line placement. Easy attachment: Connects to a 1/2 inch threaded riser. Versatile: eight, 1/4 inch barbed ports with threaded caps to close ports not in use. Prevents clogs: Easy-to-remove filter reduces debris from clogging ports.
BrandOrbit #ad
ManufacturerOrbit #ad
Height2.25 Inches
Length3.5 Inches
Weight0.1 Pounds
Width3.5 Inches
Part Number69000D
Model69000D

6. Rain Bird

#ad

Unregulated Free Flow, Rain Bird MANIFRE6S Drip Irrigation 6-Port Manifold

#ad
Rain Bird #ad - 1/2" female pipe thread bottom attaches to 1/2" male pipe threaded risers. Use to convert an existing underground sprinkler to Drip using Rain Bird RCKIT-1PS-1PS sold separately.

Low gallonage. Connects up to six 1/4" Drip irrigation tubes to a 1/2" riser. Constructed of highly durable UV and chemical-resistant materials to assure long life. Barbed outlets accepts all brands of 1/4" Drip irrigation tubing. Non-regulated free flow for use with pressure regulated water source. Versatile drip manifold. Rated for operating pressure to 40 psi. Connects up to 6 micro-watering devises to a sprinkler riser.
BrandRain Bird #ad
ManufacturerRain Bird #ad
Height4.4 Inches
Length6.5 Inches
Weight0.05 Pounds
Width11.1 Inches
Part NumberMANIFRE1PK
ModelMANIFRE6S

7. Orbit

#ad

Orbit 69005D 4-Port Drip Manifold with Adjustable Flow

#ad
Orbit #ad - Versatile: four 1/4-inch barbed ports with threaded caps to close ports not in use. Elbows rotate 360 degrees for easier line placement. Adjustable flow: Individually control the water flow to each port for precise output. Conserve water: use less water by converting shrub head watering to a drip irrigation system. Prevents clogs: Easy-to-remove filter reduces debris from clogging ports. Easy attachment: Connects to a 1/2-inch threaded riser.
BrandOrbit #ad
ManufacturerOrbit #ad
Height2.25 Inches
Length2 Inches
Weight0.05 Pounds
Width2 Inches
Part Number69005D
Model69005D

8. Rain Bird

#ad

Rain Bird RCKIT-1PS Drip Irrigation Conversion/Connection Kit for 5/8”, 1/2", .700” Drip Tubing

#ad
Rain Bird #ad - Also connects to other standard 1/2" irrigation fittings. Works with all brands of 5/8”, 1/2”, or. 700” drip tubing. Converts underground sprinklers and 1/2” risers to water-saving Drip irrigation.

Constructed of highly durable UV and chemical-resistant materials to assure long life. Converts a rain bird 1800 Series sprinkler to a low-pressure Drip system without any digging. All-in-one unit includes filter, 30 psi regulator, and universal Easy Fit Tee 1/2" tubing connection. Includes a 200-mesh filter and 30psi pressure regulator. Connects to any 1/2" male thread irrigation riser, fitting or underground pop-up sprinkler. All-in-one unit includes filter, 30psi regulator and swivel tee. Sized for easy conversion of an 1800 pop-up spray head. Replace an underground irrigation spray head or mount on any riser.
BrandRain Bird #ad
ManufacturerRain Bird #ad
Height5.96 Inches
Length4.37 Inches
Weight0.04 Pounds
Width2.1 Inches
Part NumberRCKIT-1PS
ModelRCKIT-1PS

9. Orbit

#ad

Orbit DripMaster 6705 1-Port Shrub Head Manifold

#ad
Orbit #ad - Includes filter. Connects to a 1/2-inch threaded riser. Adds drip watering to an existing shrub head. Saves water in drought conditions. Two 1/4-inch barbed ports with threaded caps. For outdoor use with cold water only.
BrandOrbit #ad
ManufacturerOrbit Underground/Sunmate #ad
Height5.75 Inches
Length1 Inches
Width3.5 Inches
Part Number67050
Model67050