As an Amazon Associate I earn from qualifying purchases.
How to install: first of all, then install the ribbon light into the connector and close the wire clip; No other tools are needed, you need to open the wire clip, the operation is easy and fast; When installing, you should make sure the side of the ribbon light is in accordance with the site of + sign in the connector.
Wide application: these strip light connectors can be applied for most 10 mm 3 pin rgb led strips, and also fit for waterproof and non-waterproof light strips; The LED strip connectors are very suitable for DIY LED strips, so that the LED strip joints are clean and beautiful; You should remove the silicon around the solder wire before inserting the waterproof strip to avoid accident.

Working stably:the sharp copper thorn design can directly penetrate the PVC to contact the copper wire, no soldering, no need to strip the wire sheath. Warm tips:please turn the front of the light strip down to make sure the contacts can touch the copper pins of the connector while installing.

Practical combination: the package includes 10 pieces strip to wire connectors and 1 pieces 5 m/ 19. 7 inch wire, so you have enough quantity to complete your use plan, which is very practical and cost-effective. Wide compatibility: the interface size of 3 pin led strip connector is 10 mm/ 039 inch, proper size for use; there are 3 welding ports, which are suitable for the link of 3 pin LED strip; You can apply our light connectors to no soldering LED strip of ws2811, sk6812, ws2812b, etc.
Easy to use: you just need to put the led strip and wire above the interface of tunable led strip connector, and then press it down with your hand or pliers to complete the connection, no welding or other tools are required; 3 Pin LED strip connectors are not powered, please check whether the voltage of your light strip and power supply match before use.


High Quality. High cost performance. Points for attention :the connector is disposable and must be broken before LED strip can be pulled out. Multiple uses: extend your strip light, corner connection, LED strip Splicing, connect the controller or power supply directly.

8ft extension cable. Extension wire: rated voltage:0-300V;rated current:0-2A. Specification:connectors:rated voltage: 0-36V;rated current: 0-5A. Premium material:those led wire are made of multi copper core who are wrapped in upgraded PVC, low resistance and anticorrosive;Led connectors are made of PC material, high conductivity, durable, transparent and beautiful.



Wide application: these strip light connectors can be applied for most 10 mm 3 pin rgb led strips, and also fit for waterproof and non-waterproof light strips; The LED strip connectors are very suitable for DIY LED strips, so that the LED strip joints are clean and beautiful; You should remove the silicon around the solder wire before inserting the waterproof strip to avoid accident.
Reliable material: made of pbt material, flame-proof and heat resistant, the LED strip connectors are durable, thick enough to ensure the safety and durability. Easy to install: first of all, the operation is easy and fast; when installing, you need to open the wire clip, then install the ribbon light into the connector and close the wire clip; No other tools are needed, you should make sure the side of the ribbon light is in accordance with the site of + sign in the connector.

Open the clip and slide the light strips under the 3 contact prongs, making sure the “+” signs of the two light strips on both sides are aligned.
Package: 10 pcs 3 pin led clip connectors. Application: suitable for all 10mm wide 039 in 3-pin smd 5050 rgb ws2811 ws2812b sk6812 flexible LED strips, making solderless and gapless connections for waterproof and non-waterproof LED light strips. 72w max wattage, which can be used for low wattage and high wattage light strips. Note: make sure you put the led strip under the pins and not on top.
1. Mudder
#ad
28 Pieces 3 Pin LED Connector LED Strip Connector 10 mm Solderless LED Light Connector L Shape LED Lights Extension T Shape Solderless LED Adapter Connectors for WS2811 WS2812B SK6812 LED Strip
#adMudder #ad - Package includes: 20 pieces 3 pin led connectors, 4 pieces L shape RGB connectors, 4 pieces T shape LED adapter light connectors, sufficient quantity can meet your various demands. Operation condition: the power should be turned off before installation to ensure the safety of operation; These LED lights connectors are suitable for 0 - 4 A current and 0 - 24 voltage, fit for LED strip SMD 5050 RGB/ RGBW in 72 W maximum power.How to install: first of all, then install the ribbon light into the connector and close the wire clip; No other tools are needed, you need to open the wire clip, the operation is easy and fast; When installing, you should make sure the side of the ribbon light is in accordance with the site of + sign in the connector.
More information #ad
Reliable material: made of pbt material, flame-proof and heat resistant, the LED strip connectors are durable, thick enough to ensure the safety and durability. Wide application: these strip light connectors can be applied for most 10 mm 3 pin rgb led strips, and also fit for waterproof and non-waterproof light strips; The LED strip connectors are very suitable for DIY LED strips, so that the LED strip joints are clean and beautiful; You should remove the silicon around the solder wire before inserting the waterproof strip to avoid accident.
Brand | Mudder #ad |
Manufacturer | Mudder #ad |
Part Number | Mudder-Connectors -DRS487 |
Model | Mudder-Extension-E4F84 |
More information #ad
2. RGBZONE
#ad
RGBZONE 10Pcs LED Strip Connectors 3 Pin Gapless Solderless Strip to Wire Quick Connector Universal for 10mm Waterproof and Non-Waterproof WS2811 WS2812B LED Strip Lights
#adRGBZONE #ad - Easy to use:convenient and easy to use, and the premuim transparent PC material makes your DIY LED light strips project awesome in reducing the dark area. What you get: 10pcs 3pin led strip connectors.Working stably:the sharp copper thorn design can directly penetrate the PVC to contact the copper wire, no soldering, no need to strip the wire sheath. Warm tips:please turn the front of the light strip down to make sure the contacts can touch the copper pins of the connector while installing.
More information #ad
Specification:those led strip connectors are suitable for waterproof and non-waterproof 10mm wide dual color led strip light and 3pin led extension cable. Rated voltage: 0-36V; Rated current: 5A. It's perfect for extending your led strip lights WS2812B/WS2812/WS2811 to wire.Brand | RGBZONE #ad |
Manufacturer | RGBZONE #ad |
Height | 0.2 Inches |
Length | 0.2 inches |
Width | 0.2 inches |
Part Number | FB0425 |
Model | FB0425 |
More information #ad
3. Frienda
#ad
11 Pieces 3 Pin LED Strip Connectors Tunable 10 mm LED Strip Light Connectors LED Strip Connector Terminal for WS2811 WS2812B SK6812 LED Strip No Soldering
#adFrienda #ad - Rugged yet durable: the main material of led corner connector is quality plastic and tinned copper, non-toxic for safe use, not easy to break or damage, with high working performance, which ensures that light connectors kit can be firmly connected to the light strip, sturdy and durable, so you can use 3 pins light connectors with confidence.Practical combination: the package includes 10 pieces strip to wire connectors and 1 pieces 5 m/ 19. 7 inch wire, so you have enough quantity to complete your use plan, which is very practical and cost-effective. Wide compatibility: the interface size of 3 pin led strip connector is 10 mm/ 039 inch, proper size for use; there are 3 welding ports, which are suitable for the link of 3 pin LED strip; You can apply our light connectors to no soldering LED strip of ws2811, sk6812, ws2812b, etc.
More information #ad
Firm connection: led strip connectors uses a bite design like a hippo, so you no longer have to worry about basic problems such as poor contact, which allows the connector to firmly fix the wires and led strips, which will save you a lot of time and money. Easy to use: you just need to put the led strip and wire above the interface of tunable led strip connector, and then press it down with your hand or pliers to complete the connection, no welding or other tools are required; 3 Pin LED strip connectors are not powered, please check whether the voltage of your light strip and power supply match before use.
Brand | Frienda #ad |
Manufacturer | Frienda #ad |
Part Number | Frienda-542061 |
Model | Frienda-542061 |
More information #ad
4. BTF-LIGHTING
#ad
BTF-LIGHTING 20 Pairs JST SM 3 Pin Connectors for WS2812B WS2811 WS2812 WS2814 SK6812 FOCB CCT LED Strip Female Male 15cm 22awg Wire
#adBTF-LIGHTING #ad - Used for: leD Light Strip. Application: great For LED Strip Connecting or more you think. No need soldering. Ws2811 ws2812b ws2814 sk6812 etc 3 pin led strip led bulb low voltage lED project.More information #ad
Please check the colors of the wires and their respective polarities before connecting to your devices. 3 pin jst sm male female plug led connector cable for ws2812b ws2812 WS2811 SK6812RGBW LED Strip strip.Brand | BTF-LIGHTING #ad |
Manufacturer | BTF-LIGHTING Technology Co., Limited #ad |
Height | 0.59 Inches |
Length | 4.72 Inches |
Weight | 0.22 Pounds |
Width | 3.94 Inches |
Part Number | 3PIN-SM |
Model | 3PIN-SM |
More information #ad
5. BTF-LIGHTING
#ad
BTF-LIGHTING 3 Pin 10mm 0.39in Width Transparent Connector Kit 8pcs Corner Connector 4pcs Gapless Solderless Connector 4pcs 5.9in Long 22AWG Extension Wires Support WS2812B WS2811 SK6812 SMD LED Strip
#adBTF-LIGHTING #ad - Characteristic: transparent, it won't block out LED strip light, seamless connection. Firm fixing. Simple operation. No tin required. Tinny and low profile design.High Quality. High cost performance. Points for attention :the connector is disposable and must be broken before LED strip can be pulled out. Multiple uses: extend your strip light, corner connection, LED strip Splicing, connect the controller or power supply directly.
More information #ad
Package content : 8pcs corner connector 4pcs Gapless Solderless Connector 4pcs 15cm Long 22AWG Extension Wires. Compatible lights : only compatible with 10mm width SMD LED Strip lights. Support led strip:3pin ws2812b ws2811 sk6812 sk6812rgbw ws2814 cct rgbic addressable chasing Color SMD LED Strip Light 10mm 039in Width.Brand | BTF-LIGHTING #ad |
Manufacturer | BTF-LIGHTING Technology Co., Limited #ad |
Part Number | 3PIN-10MM-SMD-BB-BX-XC |
More information #ad
6. RGBZONE
#ad
RGBZONE 32.8ft 3Pin LED Extension Cable Wire and 10Pcs 3Pin LED Strip Connectors Strip to Wire Quick Connection for 10mm Wide Waterproof or Non-Waterproof WS2811 WS2812B LED Strip Light
#adRGBZONE #ad - Application:those led connectors works for 10mm wide waterproof or non-waterproof dual color and digital pixel strip light or other diy project. What you get:10 pcs 3pin strip to wire connectors, 1 bundle 32.8ft extension cable. Extension wire: rated voltage:0-300V;rated current:0-2A. Specification:connectors:rated voltage: 0-36V;rated current: 0-5A. Premium material:those led wire are made of multi copper core who are wrapped in upgraded PVC, low resistance and anticorrosive;Led connectors are made of PC material, high conductivity, durable, transparent and beautiful.
More information #ad
Perfect kit:when your light strip has a certain distance from your power, when you don't need the distance of the light strip, these cables and connectors will help you solve these embarrassing distance perfectly.Brand | RGBZONE #ad |
Manufacturer | RGBZONE #ad |
Height | 0.2 Inches |
Length | 0.2 Inches |
Weight | 0.18 Pounds |
Width | 0.2 Inches |
Part Number | FB0424 |
Model | FB0424 |
More information #ad
7. ALITOVE
#ad
ALITOVE 20 Sets 3 Pin JST SM Male Female Plug LED Connector Cable 15cm 20awg Wire for WS2812B WS2812 WS2811 SK6812 SK6812-RGBW LED Strip Light
#adALITOVE #ad - Great 3 pin jst sm connectors for ws2812b ws2812 ws2811 sk6812 sk6812-RGBW LED strip light, Arduino and Raspberry Pi project. It is good for whenever you have 3 wires you want to be able to plug and unplug.More information #ad
The pigtails are pre-tinned making soldering easy. Please check the colors of the wires and their respective polarities before connecting to your devices. The connector is reliable and safe, no loose, lightweight and beautiful appearance.Brand | ALITOVE #ad |
Manufacturer | alitove #ad |
Weight | 0.26 Pounds |
Part Number | 3PINJST |
Model | 3PINJST |
More information #ad
8. HUALAND
#ad
HUALAND 2 pcs Pack 5M 16.4ft 3 Pin JST SM Male Female Plug LED Connector Cable for WS2812B WS2811 SK6812 Symphony LED Lights with connectors,SM3P Buckle Free Welding Plug Light Controller Wire
#adHUALAND #ad - Type: no soldering leD connector Wire diameter: 22AWG. Length: 1pcs/5m 16. 4ft color: red, green, white. Suitable for ws2811 sm ws2812b symphony led light bar, The connection is simple and convenient, led underground light, Welding can be directly inserted.More information #ad
Applicable voltage: 5v-24v low voltage package includes: 2pcs× LED Extension Cable, 1 pair of 5. 9 inch male and female connectors. Connector type: male to female SM-3Pin Material: PVC skin, tinned copper wire core. The plug is reliable and safe, LED panel light, flashing light and so on, no loose, light and beautiful.Brand | HUALAND #ad |
Manufacturer | HUALAN #ad |
Part Number | 7539925153 |
Model | HL-73 |
More information #ad
9. Honoson
#ad
42 Pieces 3 Pin LED Strip Connector Solderless LED Strip Connectors L Shape LED Connector T Shape LED Extension Adapter Connectors for 10 mm WS2811 WS2812B SK6812 LED Strip
#adHonoson #ad - Operation condition: the power should be turned off before installation to ensure the safety of operation; These LED lights connectors are suitable for 0 - 4 A current and 0 - 24 voltage, fit for LED strip SMD 5050 RGB/ RGBW. Package includes: you will receive 30 pieces gapless 3 pin connectors, 6 pieces T shape LED adapter light connectors, 6 pieces L shape RGB connectors, sufficient quantity can meet your various demands.Wide application: these strip light connectors can be applied for most 10 mm 3 pin rgb led strips, and also fit for waterproof and non-waterproof light strips; The LED strip connectors are very suitable for DIY LED strips, so that the LED strip joints are clean and beautiful; You should remove the silicon around the solder wire before inserting the waterproof strip to avoid accident.
More information #ad
Reliable material: made of pbt material, flame-proof and heat resistant, the LED strip connectors are durable, thick enough to ensure the safety and durability. Easy to install: first of all, the operation is easy and fast; when installing, you need to open the wire clip, then install the ribbon light into the connector and close the wire clip; No other tools are needed, you should make sure the side of the ribbon light is in accordance with the site of + sign in the connector.
Brand | Honoson #ad |
Manufacturer | Honoson #ad |
More information #ad
10. Vrabocry
#ad
Vrabocry 10 Pcs 3-Pin RGB LED Light Strip Connectors 10mm Wide Gapless LED Tape Light Clips Solderless Adapter Connectors for SMD 5050 Multicolor WS2811 WS2812B SK6812 LED Strips
#adVrabocry #ad - Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side. If you have any issues, inquiries or need assistance, please feel free to contact us directly. Please peel off silicon on the surface around soldering area when installing waterproof LED strips.Open the clip and slide the light strips under the 3 contact prongs, making sure the “+” signs of the two light strips on both sides are aligned.
More information #ad
Ideal for extending the LED strip and straight connection. Easy to use: quick shunt connection and solderless snap down. Fireproof material: led connectors are made from PBT material, which is heat resistant, fireproof and no Fire Hazard. Package: 10 pcs 3 pin led clip connectors. Application: suitable for all 10mm wide 039 in 3-pin smd 5050 rgb ws2811 ws2812b sk6812 flexible LED strips, making solderless and gapless connections for waterproof and non-waterproof LED light strips. 72w max wattage, which can be used for low wattage and high wattage light strips. Note: make sure you put the led strip under the pins and not on top.
Brand | Vrabocry #ad |
Manufacturer | Vrabocry #ad |
More information #ad