Top 10 Wind Turbine Mounting Pole Kit – Home & Kitchen

As an Amazon Associate I earn from qualifying purchases.

1. Davis Instruments


Davis 7717 Mounting Pole Kit

Davis Instruments #ad - Outside diameter of both poles is 1. 5" long. Second pole is 21" long. One pole is 19. Includes connector and mounting hardware. 5". Total length of both poles is 37. 31".
BrandDavis Instruments #ad
ManufacturerDavis #ad
Height3 Inches
Length22 Inches
Weight2.2 Pounds
Width3 Inches
Part Number7717

2. Ambient Weather


Ambient Weather EZ2-35W2MC Weather Station Pole Mounting Kit

Ambient Weather #ad - Also includes 2 1. 25 inch clamps and 4 ¼ diameter x 3 inch lag screws for mounting to any vertical surface. Add a mast extension to extend the pole an additional 35 inches sold separately. Note: anemometer pictured is not included. Constructed of galvanized, rust proof 10-steel tubing. Includes 6 14 x 1. 25 diameter inch masts that you can assemble to your desired height fully assembled height is 66 inches.
BrandAmbient Weather #ad
ManufacturerAmbient Weather #ad
Height37 Inches
Length4.25 Inches
Weight4.3 Pounds
Width2.25 Inches
Part NumberEZ2-35W2MC
WarrantyOne year parts and labor.

3. Woodlink


Woodlink HDPOLE 3 Piece Pole Mount Kit

Woodlink #ad - Fits most mountable feeders. 1" outside diameter, powder coated steel. 6" by 2" mounting plate screws onto bottom of feeder to hold pole. 6-inch by 2-inch mounting plate screws onto bottom of feeder to hold pole. Fits most mountable feeders. Three pieces includes the 72-inch pole, mounting bracket and ground socket. Three pieces includes the 72"pole, mounting bracket and ground socket.
BrandWoodlink #ad
ManufacturerKay Home Products #ad
Height1.5 Inches
Length38.88 Inches
Weight3.5 Pounds
Width3.5 Inches
Part NumberHDPOLE

4. Pikasola


Pikasola Wind Turbine 200W max 220W 12V 5 Blade Wind Vertical Axis Generator 3 Phase AC Permanent Magnet Generator Wind Turbine Kit with Controller for Hybrid Wind Solar System

Pikasola #ad - Quietly-: the vertical wind turbine is quieter than horizontal axis turbine. Also make the wind wheel and the generator matching better and then running more reliability. 4. Especially with optimized aerodynamic shape and structural design, has a High wind energy utilization.

Screw pile foundation can be fully recycled at the end of life. Safety factor is high due to blades be fixed inside by a flange, then not risk of blade falling off. An environmentally friendly and low carbon emission way. It is a cost reduction and easy&quick installation compare with concrete foundation installation. 2. High wind energy utilization-): wind blades adopt reinforced fiber nylon which more durable and strong ability of Anti-wind.

Wind turbine can start by breeze and adapt to 360° wind, no yaw system is needed. Silent rotation, marine, boat, suitable for home, monitoring use, solar and wind hybrid street lighting system.3. Double bearings make it more stable and not easy to shake when wind generator is running. Installation convenience-: vertical axis wind turbine can use a screw pile foundation. 5.
BrandPikasola #ad
ManufacturerPIKASOLA #ad
Height12 Inches
Length23.4 Inches
Width17.3 Inches

5. Ambient Weather


Ambient Weather EZ-125-35M 35" Mast Extension for Weather Stations

Ambient Weather #ad - Made of 18 gauge 1008-10 steel tubing, galvanized using the Flo-Coat zinc-chromate-polymer process for excellent corrosion protection. For use with the ez2-35w2mc pole mounting kit or EZ-48-3AB-125-35 Tripod and Mast Assembly. Three galvanized assemblable 14" x 1. 25"-diameter swedged masts for insertion into another pole with similar O. D. When used with the ez-48-3ab-125-35 mast assembly, this extension will raise the anemometer to a height of 84 inches, with an effective adjustment range of 72 to 89 inches 187. 2 to 231. 4 cm.
BrandAmbient Weather #ad
ManufacturerAmbient Weather #ad
Height36 Inches
Length3 Inches
Width3 Inches
Part NumberEZ-125-35M
Warranty1 year factory warranty.



AUECOOR 1600 Watts 24V Solar Wind Turbine Generator Kit: 1pc 400 Watt Wind Turbine + 10pcs 120W Mono Solar Panel +Solar Charge Controller & Wind Controller + 1pc 3000W 24V Inverter

AUECOOR #ad - High efficiency : high module conversion efficiency. Widely application: perfect for rv's, boats, cabins and back-up power! multiple auecoor 120 watt solar Panels can be wired in parallel to increase charging current amps to a 12 volt battery. Easy installation: compatible with different auecoor mounting systems such as Z-Brackets, Pole Mounts and Tilt Mounts.

Diodes are pre-installed in junction box and a pair of 90cm cables with connectors are installed on the panels for easy connection. Advanced encapsulation material with multilayered sheet laminations to enhance cell performance and provide a long service life. Or multiple auecoor 120 watt solar panels can be wired in series to increase voltage for 24 volt or 48 volt battery charging. Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments.

Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. Reliable: auecoor tested solar modules, no hot-spot heating guaranteed. The tail fin is designed according to the aerodynamic principle. Withstand high winds 2400Pa and snow loads 5400Pa. About the wind turbine:with yaw adjustment system, automatically read the wind position, the rotor position is adjusted to capture the maximum wind energy.
BrandAUECOOR #ad
ManufacturerAUECOOR #ad

7. Dyna-Living


Dyna-Living Wind Turbine 24V 800W Wind Turbine Generator Kit 3 Blades Wind Turbines Motor with Charge Controller Not Included Mast

Dyna-Living #ad - The working temperature is -40 ° c ~ 80 ° C, do not worry about the temperature being too low and causing the leaves to freeze. The blades using reinforced glass fiber, which increased wind power coefficient and power generation capacity. The longer the blades, the more kinetic energy they generate and with higher efficiency.

Main feature of 800w wind turbine- low start speed: 2. 0m/s, rated wind speed: 13m/s; the overall diameter of the wind turbine is 1. 3m / 51. 18 inches. Teflon wire is heat-resistant, so it is not easy to damage the wire when the machine is overloaded. Durable wind turbine 24v- the wind turbine motor adopts a three-phase ac permanent magnet synchronous generator, low noise and long service life. It has effective regulation of current and voltage. High wind energy utilization-the coil is made of teflon wire, improved with optimized structure and aerodynamic shape, which is resistant to high temperatures.

Wind turbine generator 3 blades-the blade is equipped with a copper inlay part that does not damage the nylon fiber when the bolt is tightened, and the blades are not easily deformed or broken. It is smooth in operation, free running, excellent wind resistance for double-row bearing. Wide application-this 24v wind turbine generator is easy installation and maintenance, as well as for green windmills, which is suitable for the leisure sector, homes, gazebos, cabins or mobile homes, such as being used for boats, corporate and industrial energy for electricity supply.
BrandDyna-Living #ad
ManufacturerDyna-Living #ad

8. Pikasola


PIKASOLA Wind Turbine Generator 12V 400W with a 30A Hybrid Charge Controller. As Solar and Wind Charge Controller which can Add Max 500W Solar Panel for 12V Battery.

Pikasola #ad - Rotating body: with yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. Nylon material waterproof, made of nylon carbon fiber.

Wind generator: three-phase permanent magnet synchronous motor. The longer the blades are, corrosion resistant, lightweight. Wind blade: 23. 4inch in length, the more kinetic energy generate and more power they produce. Efficient and compact ac generator with high performance NdFeB permanent magnet. Solar&wind charge controller: match a 30a hybrid charge controller which can extend Max 500W solar panel for 12V wind and solar power system.

The controller can help to charge battery intelligently and protect automatically. Feature: starting with Low Speed; high wind energy utilization; low vibration on operation, high efficiency. The tail fin is designed according to the aerodynamic principle.
BrandPikasola #ad
ManufacturerPikasola #ad
Warrantythe warraty is one year.



ECO-Worthy Adjustable Multi-Pieces Solar Panel Mounting Brackets Kit System for 1-4pcs Solar Panels

ECO-WORTHY #ad - Adjustable angle from 30° to 45° degree, right angle for best solar power. Eco-worthy multi-panels mount has the capability to fit 1-4pcs different size ECO-WORTHY panels or other brands standard panels.

The multi-panel mount is compatible with the eco-WORTHY 100 Watts monocrystalline, and 120 Watts monocrystalline and 195 Watts solar panels. It can save lots of room and use solar power system easier. It’s ideal for larger installations, cabins and backyard sheds. Anywhere roof mounting is not a possibility, such as ground, flat roof, this solar panel mount can be applied. You can put battery, inverter at backside of the mounting system. Fixed on ground resistant wind and rain, well protect solar panel and easy to clean. Three-legged structure make mounting steady. Galvanized steel construction, controller, sturdy and durable.

10. Newpowa


Newpowa Universal Double Arm Pole Mounting Bracket Designed for up to 2pcs 100-200w Solar PanelsMax 400W at an tilt Angle from 0°-90°

Newpowa #ad - Ideal for mounting 2pcs newpowa 100-200W solar panels with 0~90 degree tilt angle. Heavy-duty aluminum alloy with bottom support provides a safe and secure mount to pole, wall, fence or any flat surface. Diy may be required for other brand solar panels that come without mounting holes. New designuniversal double arm tilt mount bracket kit for two solar modulestotal width up to 55in. Includes all screws, washers, bolts, nuts and steel clamps for installation.
BrandNewpowa #ad
ManufacturerNewpowa #ad
Height2 Inches
Length56 Inches
Width3.5 Inches
Part NumberNPB-400P