As an Amazon Associate I earn from qualifying purchases.
Hi-Lift #ad - 5, 000 pound lift capacity. Fit type: Vehicle Specific. Included components: Jack Nose AdapterNylon Straps With Hooks. The hi-lift lm-100 lift-mate allows any Hi-Lift jack to lift a wheel or vehicle directly from the wheel.
Hi-Lift #ad - Features carbon fiber embossing and PVC Hi-Lift logo patch. Made with marine grade Vinyl UV Protected, Mold and Mildew Resistant. Fits all hi-Lift Jack Models. Easy on, easy Off Zipper Design.
Hi-Lift #ad - The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage. Unique design allows Hi-Lift Jack to be used without removal of Handle-Keeper.
TaoTazon #ad - And if you want to use the jack, you can be easily slid for quick removing without any tool. It can be apply for hl485 all cast jack, hl484/hl364 cast and steel jack, farm jack, EJ550 agriculture jack, UTV Jack and etc. Benefit from the universal design of the Jack accessories, only insert the rubber handle to finish the installation.
We also provide you one year warranty for this handle holder and 24/7 service, we alway check the all product before sending, don't hesitate to get in touch with us. One year warranty: your satisfaction is our top priority, if you have any questions or concerns about this product, so you will get the best one.
Firmly fixed：the handle keeper is a must have tool for any hi-lift jack owenr. Strong hardness up to 65°，not easy to break while long time using. Easily release & install：this jack handle keeper protector can be easy to slide on or off for quick installation and release. Universal jack handle keeper：this handle locker can be used for most of jacks except post popper jack. Heavy duty rubber material： this jack handle bar keeper is made of durable and soild rubber.
Seven Sparta #ad - Do not fit for posT POPPER Jack. Handle keeper for securing jack: this handle bar is a must have item used to keep jack handle in place, when you install the jack in your truck bed or to the side during transportation and storage, especially off-roading or on the highway.
Give the off-road Base better footing and greater stability during the lifting process. Heavy duty & solid material: the jack stand is made of a tough PP synthetic material, better more than a chunk of wood will not rot or break.
Alleviate jack sinkage on soft ground: Used on soft ground like sand, mud, grass. This handle bar keeper is crafted from durable rubber, which is rustproof and solid. This set of handle keeper & jack base compatible with most jacks: designed and used for most of jacks, Cast/Steel Jack, Patriot Edition Jack, X-TREME Jack, UTV Jack, Includes model All-Cast Jack, Equipment/Agriculture JackEJ-550.
Ugotfeels #ad - The handle grip is made of rubber, non-slip, which is durable, soft &comfortable and provides comfort and a better hold. Used to prevent the handle from falling off causing scratches anywhere.
Lotus Development #ad - A locking, removable, low profile pin, exclusive to LD adapters. Welded steel construction with a powder coat finish. Rock slider adapter for Hi-Lift band lift jacks.
WHSSFINE #ad - Lift capacity. Fits most off-road style jacks including Hi-Lift. High lift jack mounting bracket with powder coated surface and steel material, Easy to install to any side of roof rack, bolts into existing holes. Jack farm accessories kits: jack farm accessories includes Jack Mounting Hood Brackets, Jack stabilizer and handle keeper, tire lifter.
11. 5" x 11. 5" off-road jack stand with 5. 1" x 7. 4" base, rugged and durable, this jack can withstand extreme weather can be used on soft ground like sand, mud, grass, etc.
Universal design: compatible with stock and most aftermarket rear bumpers. Bracket is sturdy and secures the jack in two locations to eliminate any vibration noise during vehicle operation. No drilling required. The base's bottom has a textured pattern designed for a more solid grip.
Agency 6 #ad - Works off-road no matter where your jack is mounted. Designed to work with Hi-Lift Jacks. Innovative design and materials to last FOREVER - No more splitting, cracking, and replacing your jack isolator.
ROCCS #ad - Easy to store and carry: it can be stored under the seats or put the Hi Lift Jack base in the trunk. This base was enough to keep the Hi-Jack from slipping and sinking into the mud while you are hoisting the vehicle. Note: d0es not fit for smittybilt 2722 & hi lift Jack PP-300 Post Popper.
The red color is very easy to be found in the mud, you won't lose it. Quality material & heavy duty: made of a tough pp synthetic material, thick and sturdy materials. Compatibility: this off raod base compatible with most hi lift jacks, x-treme jack, Cast/Steel Jack, patriot edition jack, like all-Cast Jack, UTV Jack, Equipment/Agriculture JackEJ-550.
Thick & bright color: the widened bottom plate is suitable for use on soft ground to prevent the jack from sinking and slipping; The bottom is hexagonal which increases the contact area between the base and the ground, it is more stable and does not slip during use. Also a drilled hole in center of base attached to your jack bar.
1. Hi-Lift
#adHi-Lift Jack LM-100 Lift-Mate
#adMore information #ad
Greatly reduces the amount of travel up the jack bar required to lift the wheel to an adequate and safe height. Rubber pad protects tire/wheel at lifting point on jack. Rubber coated hooks protect wheels.| Brand | Hi-Lift #ad |
| Manufacturer | ARB #ad |
| Height | 4 Inches |
| Length | 8.25 Inches |
| Weight | 4 Pounds |
| Width | 4.75 Inches |
| Part Number | LM-100 |
| Model | LM-100 |
| Warranty | 12 months from the date of purchase, only to the original owner, against defective materials and workmanship. |
More information #ad
2. Hi-Lift
#adRunning Gear Jack Cover, Black
#adMore information #ad
| Brand | Hi-Lift #ad |
| Manufacturer | Hi-Lift #ad |
| Height | 1.5 Inches |
| Length | 13 Inches |
| Weight | 0.6 Pounds |
| Width | 12 Inches |
| Part Number | RGJC |
| Model | RGJC |
| Warranty | Hi-Lift® Jack Company warrants all Hi-Lift® Jacks for 12 months from the date of purchase, only to the original owner, against defective materials and workmanship. |
More information #ad
3. Hi-Lift
#adHi-Lift Jack HK-B Black Handle-Keeper
#adMore information #ad
Made in USA. Molded using same technology as QuickFist Mounts. Crafted from durable, transportation grade rubber. Easily slips onto Jack handle and is secured with integrated strap.| Brand | Hi-Lift #ad |
| Manufacturer | ARB #ad |
| Height | 1.5 Inches |
| Length | 9 Inches |
| Weight | 0.35 Pounds |
| Width | 4.5 Inches |
| Part Number | HK-B |
| Model | HK-B |
| Warranty | 0 |
More information #ad
4. TaoTazon
#adRubber Hi Lift Jack Accessories, TaoTazon Handle Keeper, Upgrade Handle Bar Protector for High Lift Jack in Place, Rust-Resistant Hi-Lift Jack Handle Keeper
#adWe also provide you one year warranty for this handle holder and 24/7 service, we alway check the all product before sending, don't hesitate to get in touch with us. One year warranty: your satisfaction is our top priority, if you have any questions or concerns about this product, so you will get the best one.
More information #ad
Our handle bar protector is calcined through high temperature molding process, wear resistant, anti-slide, anti-stress. This hi-lift jack accessories can hold the steel bar in place, in case of annoying noise generation while transportation and storage, With the unique notch design, you don't need to remove the top clamp when installing or removing the handle holder. Firmly fixed：the handle keeper is a must have tool for any hi-lift jack owenr. Strong hardness up to 65°，not easy to break while long time using. Easily release & install：this jack handle keeper protector can be easy to slide on or off for quick installation and release. Universal jack handle keeper：this handle locker can be used for most of jacks except post popper jack. Heavy duty rubber material： this jack handle bar keeper is made of durable and soild rubber.
| Brand | TaoTazon #ad |
| Manufacturer | TaoTazon #ad |
| Part Number | JS-122 |
| Model | JS-122 |
More information #ad
5. Seven Sparta
#adSeven Sparta Base Stand & Handle Keeper Compatible with Hi Lift Jack Accessories Handle Bar Protector
#adGive the off-road Base better footing and greater stability during the lifting process. Heavy duty & solid material: the jack stand is made of a tough PP synthetic material, better more than a chunk of wood will not rot or break.
More information #ad
Eliminate noise & friction: handle bar does eliminate rattling and avoids friction and rubbing between the Jack or truck body, no rattling while driving. Alleviate jack sinkage on soft ground: Used on soft ground like sand, mud, grass. This handle bar keeper is crafted from durable rubber, which is rustproof and solid. This set of handle keeper & jack base compatible with most jacks: designed and used for most of jacks, Cast/Steel Jack, Patriot Edition Jack, X-TREME Jack, UTV Jack, Includes model All-Cast Jack, Equipment/Agriculture JackEJ-550.
| Brand | Seven Sparta #ad |
| Manufacturer | Seven Sparta #ad |
| Part Number | Jack Base with Black Jack Handle-Keeper |
More information #ad
6. Ugotfeels
#adHandle Grip for Hi-Lift Jacks & Other Off Road Lift Jacks |Made of Rubber|, Black
#adMore information #ad
The inner diameter of handle grip is 1 1/4 inch to fit most lift jacks. Protect your hands from freezing when working outside in cold weather.| Brand | Ugotfeels #ad |
| Manufacturer | Ugotfeels #ad |
| Height | 1.97 Inches |
| Length | 4.7 Inches |
| Width | 1.97 Inches |
| Model | HG001 |
| Warranty | 1 year |
More information #ad
7. Lotus Development
#adLotus Development Rock Slider Adapter w/locking pin for Hi-Lift Jacks
#adMore information #ad
| Brand | Lotus Development #ad |
| Manufacturer | Lotus Development #ad |
| Height | 4 Inches |
| Length | 6 Inches |
| Weight | 2 Pounds |
| Width | 4 Inches |
| Part Number | LOTSLDR |
| Model | LOTSLDR |
More information #ad
8. WHSSFINE
#adHigh Lift Jack Mount Bracket kit for Roof Rack with Jack Base Handle Keeper Lift Mate Wheel Lifter Compatible with Hi Lift Jack
#ad11. 5" x 11. 5" off-road jack stand with 5. 1" x 7. 4" base, rugged and durable, this jack can withstand extreme weather can be used on soft ground like sand, mud, grass, etc.
More information #ad
Durable textured finish looks great. Complete kits meet your needs. Lift-mate tire lifter: polyster straps with rubber coated double J hook protect wheels, tire lifter can allows any Lift jack to lift a wheel or vehicle directly from the wheel and can allow 5, 000 lb. Universal design: compatible with stock and most aftermarket rear bumpers. Bracket is sturdy and secures the jack in two locations to eliminate any vibration noise during vehicle operation. No drilling required. The base's bottom has a textured pattern designed for a more solid grip.
| Brand | WHSSFINE #ad |
| Manufacturer | WHSSFINE #ad |
| Height | 2.36 Inches |
| Length | 11.81 Inches |
| Width | 12.2 Inches |
| Part Number | DTQ-Kit |
More information #ad
9. Agency 6
#ad304 Stainless Steel, Cracking, Proudly Made in The USA with US Certified Materials, or Replacing, Agency 6 Jack Handle Keeper for Hi-Lift Jacks, No Splitting, Coated RED
#adMore information #ad
Sourced 304 stainless steel, giving you the most durable product available. Secure lockable jack handle holder - add a padlock to keep your equipment safe. Lifetime warranty - the jack handle keeper is made in America of U. S.| Brand | Agency 6 #ad |
| Manufacturer | Agency 6 #ad |
| Part Number | JHK-RED |
More information #ad
10. ROCCS
#adROCCS Jack ORB Off- Road Base Fit for Hi Lift Jack/Sky Jack/Trail Jack to Alleviate Jack Hoisting Sinkage
#adThe red color is very easy to be found in the mud, you won't lose it. Quality material & heavy duty: made of a tough pp synthetic material, thick and sturdy materials. Compatibility: this off raod base compatible with most hi lift jacks, x-treme jack, Cast/Steel Jack, patriot edition jack, like all-Cast Jack, UTV Jack, Equipment/Agriculture JackEJ-550.
More information #ad
With serrated teeth: use the teeth to level out the ground before Jacking, the jagged edge helps to scrape at hard dirt or gravel, to create a clean, flat surface for the base to sit on while in use. Thick & bright color: the widened bottom plate is suitable for use on soft ground to prevent the jack from sinking and slipping; The bottom is hexagonal which increases the contact area between the base and the ground, it is more stable and does not slip during use. Also a drilled hole in center of base attached to your jack bar.
| Brand | ROCCS #ad |
| Manufacturer | ROCCS #ad |
| Height | 3 Inches |
| Length | 28 Inches |
| Weight | 3 Pounds |
| Width | 28 Inches |
| Part Number | Hi-Lift Jack Base |
More information #ad
