Top 10 Flag Pole Spinner Rings – Flagpole Hardware

As an Amazon Associate I earn from qualifying purchases.



MOFEEZ Flagpole Rotating Rings,360 Degree Anti-Wrap Flag Mounting Rings with Bearings for 7/10¡±-1¡± Diameter Flag Pole Tangle Free Pack of 2-Gold

MOFEEZ #ad - Machined from solid durable aluminum: No need to worry about the hole where you hook the flag shear off, flag pole replacement parts will last a long time. The days of untangling your flag 3-4 times/day are OVER! Come with worry-free 18-month customer service.

If there are any concerns, just contact us through amazon message system. Never worry about the rings or the spin separated from the base. Buy with confidence! Get the job down in 5mins. No lubrication ever needed, perfect tangle free design. Install less then 5 minutes: slide flagpole into the channel of the flag rotation ring, then tight the set screws. Hook flag up with a carabiner. Connect tightly: firm seat assembled with no wobble. Super smooth rotation: mofeez flag pole swivels parts have spinning free bearings, swivel effortlessly without catching.
BrandMOFEEZ #ad
ManufacturerMofeez #ad
Height2.5 Inches
Length2.7 Inches
Width2.7 Inches
Part NumberPD-21472

2. BonyTek


Silver, BonyTek 2 Pack Aluminum Alloy Flag Pole Rings, 360 Degree Rotating Flagpole Flag Mounting Rings Spinning Flag Pole Kit with Carabiner for 0.75-1.00 Inch Diameter Flagpole Φ 1 inch

BonyTek #ad - 2 pack mounting rings and 2 Pcs Carabiners with Gift Box for You. Designed for flags with grommets & comes with two Carabiners: Hanging the Carabiner Between the Flagpole Ring Hole and the Flag Grommet, for Connecting the Flagpole and Flag.

360 degrees free rotating mounting rings: the mounting rings have a Rotating Anti-wrap Ring, It allows Flags to Fly Freely in the Direction of the Wind, and Preventing the Flag from Wrapping Around the Flagpole. Be sure to keep installation as described in picture. They can adapt to a Variety of Harsh Environments. To avoid hanging buckles affecting the rings 360 degrees rotating.

With adjustable screw, specifically designed for 075-1. 0 inch outside Diameter Flag Poles. Note: more Than 1. 0 inches outside diameter of the Flagpole Can't Be Used. High quality aluminum alloy and carabiner design: lightweight, No Rust, No Flading, no deformation, Durable, No Cracking. Install note: please pay attention to install Direction.
BrandBonyTek #ad
ManufacturerBonyTek #ad
Height1.18 Inches
Length1.5 Inches
Weight0.22 Pounds
Width1.5 Inches
Part Number4332687516

3. Anovo


Aluminum Alloy Flagpole Rings 360° Rotating Anti Wrap Flag Mounting Ring, Spinning Flag Pole Clips with Carabiner for 0.75-1.02 Inch Diameter- Pack of 2 Matte Silver, Flag Pole Rings

Anovo #ad - Install note: be sure to keep installation direction as shown in picture. Easy to adjust: adjust with 2 screws, long screw fit for 075 inch flagpole, short screw fit for 1 inch flagpole.

Allows you to install flagpoles in the 075-1. 02 inch diameter range. Anti-wrap design: 360 degrees rotating anti-wrap ring design and upgrated build-in screw, allow even on a windy day the flag flies freely. Arc design of small ring minimize wear. Premium material & arc design: swivel ring part made of stainless steel, other parts made of high quality aircraft grade aluminum alloy make sure hold up in weather and time. Easy to install: according to the diameter of your flagpole, select the appropriate screw; Slide them up your pole, tighten the thumb screws and clip on your flag.
BrandAnovo #ad
ManufacturerAnovo #ad



Silver, Upgraded Flag Pole Kit w/ 2-Position Bracket Holder & Rotating Flag Rings, House Wall Mount Flag Pole for Residential 6 FT, 5FT to 6Ft 1" Metal Flagpole Kit for 3x5 & 4x6 American Flag

REERON #ad - The wall mount flag pole comes with 5 sections splicable pole, the thickness of the flagpole wall is thickened from 038mm to 045mm, and flagpoles with threaded joints can be installed without tools, just need to rotate and twist to complete the installation and disassemble of the flag pole. Comes with 2 pcs aluminium carabiners, perfect connectors for flag pole and flags with grommets! Equipped with 4 high-hardness steel 41mm lengthen screws & 4 anchors & 1 butterfly screws, precision polishing process, with waterproof and anti-rust coating protection, allow the flag to be displayed at 45 or 90 degrees from the mounting wall or post.

3360° anti-wrap rotating silver flagpole clips- our tangle free aluminum alloy flagpole rings with unique improved tangle free rotating high-strength steel ring, withstand harsh weather elements! Rings inner diameter is 1. 02", effectively reduce tangling issue, no rust, rotating super smooth, also not easy to bend or break, more durable, adjust size by built-in screw and allen wrench.2

2-positions white flag pole holder- the 1" heavy duty 2-position flag pole mounting bracket, stable durable, long-lasting. The spinning flagpole with bracket can be installed on your house yard garden wall, porch, school, fences, roofs, wooden posts or truck, commercial, keep your American Flag always flying free proudly in the wind!. Made of thickened premium aluminum material die-casting, very strong hardware kit can be used safely outdoors! Widely applicationsreeron 6ft flagpole kit is suitable for residential, business, as wall mount flag pole, boat.
BrandREERON #ad
ManufacturerREERON #ad



Aluminum Alloy 0.75-1.02 Inch Flag Pole Rings, 360 Degree Rotating Tangle Free Flagpole Flag Mounting Rings Spinning Flag Pole Kit with Carabiner, YARKOR Flag Pole Clip 2 Pcs

YARKOR #ad - The material is rust free, they can adapt to a variety of harsh environments. Tangle free design - the mounting rings have a 360 degrees rotating anti-wrap ring, It allows flags to fly freely in the direction of the wind, and preventing the flag from wrapping around the flagpole.

Easy installation - our flag pole mounting ring clip will take you less than 5 seconds to install. What this means is the outside diameter of the flagpole is 075-1" inch. Simply attach the clip to flag's grommet, adjust its position on the flag pole and secure the screw with hex key included. Designed for flags with grommets. Super strong aluminum alloy - these mounting rings are constructed to withstand the ourdoor elements such as rain, wind or harsh sunlight.

Meticulously crafted - designed for flags with grommets & Comes With Two Carabiners - Hanging the Carabiner Between the Flagpole Ring Hole and the Flag Grommet, for Connecting the Flagpole and Flag. One inch diameter - compatible with any flagpoles that's 1 inch diameter or less.
BrandYARKOR #ad
ManufacturerYARKOR #ad
Part NumberFlagPoleRings

6. Ripeng


6 Pieces Flag Pole Rings 360 Degree Rotating Anti-Tangle Flagpole Ring Aluminum Alloy Flag Pole Ring Mounting Ring Clip for 0.75 to 1 Inch Diameter Flag Pole Black

Ripeng #ad - Package content: you will receive 6 sets flag pole rings, each flag pole ring is approx. Durable snap hooks: here are 3 pieces useful aluminum alloy snap hooks which are designed for flags with grommets, hanging the snap hook between the flagpole ring hole and the flag pole. 360 degree anti-wrap design: the aluminum alloy flag pole ring allows flag to fly in the wind, rotating more smoothly, preventing the flag from wrapping around the flagpole, more durable and not easy to rust, it will effectively reduce tangling problems.

Durable material: our flag pole ring is made of aluminum alloy which is durable and sturdy, not easy to deform or rust, so it can be applied for a long time and the proper size will not take up too much spaces. 1 inch/ 2. 54 cm in inner diameter and 1. 46 inches/ 3. 71 cm in outside diameter, 3 x hex wrenches and 1 x manual, including 6 x flag pole rings, 6 x snap hooks, the height is 1.1

18 inches/ 2. 99 cm, the size is suitable for 075 to 1 inch diameter flag pole; Please note that the flagpoles which are out of the range cannot be installed; Please confirm the size before purchasing. Easy to install: you just need to install 2 rings to the flagpole, then adjust the position on the flag, then attach the top and bottom grommets of the flag to the snap hooks located on the rings, finally tighten the small positioning screws through hex wrench to ensure rings are mounted; In order to ensure normal installation, please confirm the size before buying.
BrandRipeng #ad
ManufacturerRipeng #ad
Part NumberRipeng-Pole Rings-1325

7. Stanwood Wind Sculpture


Stanwood Wind Sculpture Non Tangle Flagpole Swivel/Rotating Ring, Anodized Aluminum Spinner with Stainless Steel Bearing, Proudly Made in the USA, 1", Pack of 2

Stanwood Wind Sculpture #ad - Or we will give you a full refund. Designed for easy replacement of bearings. Anodized aluminum material to withstand damages from harsh elements. Designed and engineered to last forever; Covered by a lifetime warranty. Stainless steel bearings for super smooth rotation. 100 percent tangle-free.
BrandStanwood Wind Sculpture #ad
ManufacturerStanwood Wind Sculpture #ad
Weight0.66 Pounds
Part Number4336503553

8. Anley


Pack of 2, Anley 1.25" Aluminum Flagpole Mounting Rings Set, Anti Wrap 360° Rotatable Ring with Carabiners, Ideal for 1-1/4 Inch Diameter Flag Pole & Flag with 2 Grommets Silver

Anley #ad - Tangle free - set you free from unwrapping your flag over and over again. For better performance, you can utilize lubricant on the rotating parts. Designed for flags with grommets, and is compatible with any flagpoles that diameter of 1.

25". Package includes - 2 pieces of mounting rings, with carabiners. All elements are designed to withstand harsh weather. These mounting rings are anti-wrapped, effectively 360° rotatable. The aluminum is rust free and widely used in all weather conditions. Premium quality - if you are not satisfied with the performance of plastic mounting rings, you should try these! Constructed with aluminum alloy, coupled with carabiners. Warranty - we stand behind our products! All items sold by ANLEY come with a 3-MONTH replacement warranty. Heavy duty - these mounting rings have a longer lifecycle than others.
BrandAnley #ad
ManufacturerAnley #ad
Height1.6 Inches
Length4.7 Inches
Weight0.01 Pounds
Width3.3 Inches
Part NumberA.FlagPole.Ring.Sil.1.26

9. Smirdx


Stainless Steel Wall Mounted Spinning Flag Pole for Outdoor, 6 FT Flag Pole Set with 2 Aluminum Flagpole Rings, Anti Wrap Flagpole Kit with Installation Tool, Holder and 2 Carabiners

Smirdx #ad - Easy to assemble and use: 5 section design, flagpoles with thread splicing only need to be spliced with each other, our flag pole kit will take you less than 3-5 minutes to install with hex key included. Welcome to smirdx direct Store’s premium quality and worth price Aluminum Flagpole Set.

Supreme quality: our flag pole made of high quality stainless steel and flagpole rotating ring is made of aluminum alloy, which is durable and rust-proof, suitable for rainy days or strong winds, will outperform inferior plastic rings which are known to break. Worry-free service: 7 x 24 hours after-sales service, if you are not satisfied, 100% refund money. Easily disassemble and store;. You could adjust the length from 2FT to 6FT according to your needs. We provide two-position flagpole brackets made of high-quality aluminum alloy, durable and anti-rust, 45-degree or 90-degree angle and it with 3 fixing clamp keep your flag pole much more steady in the heavy wind.

360 degrees tangle-free design: our flagpole kit has 2 rotating anti-wrap Ring, It allows Flags to Fly Freely in the Direction of the Wind, and Preventing the Flag from Wrapping Around the Flagpole. The american flag looks majestic on this flagpole! Humanized design: our 1" diameter flag pole kit consists of 5 sections of poles.
BrandSmirdx #ad

10. Hotop


4 Pieces Flag Pole Rings Aluminum Alloy Mounting Rings 360 Degree Rotating Flagpole Anti Wrap Flag Pole with Clip Hook for 1 Inch Diameter Flag Pole Black

Hotop #ad - Material and size: our flag pole rings are made of aluminum alloy, so it's fit for 1 inch diameter flagpole, durable and no rust for you to use with a long time; The inner diameter of ring is 1 inch, measure the diameter of your flagpole carefully.

Anti-wrap design: the flag pole rings are deigned with a 360 degree rotating anti-wrap ring, which allows flags fly freely in the direction of the wind, and preventing the flag from wrapping around the flagpole. Easy to install: you just need to install the 2 aluminum alloy mounting rings to the flagpole, then attach the top/ bottom grommets of the flag to the clip hook located on the rings, and then adjust its position on the flag pole. Crafted equipment: there are 2 pieces clip hooks for you hanging the clip between the flagpole ring hole and the flag grommet, which help you to connect the flagpole and flag, let you apply more easily.

Package details: the package comes with 4 pieces 360 degree rotating flagpoles and 4 pieces clip hooks, the inner diameter is 1 inch/ 2. 54 cm, sufficient quantity will meet you daily demands, the outside diameter is 1. 46 inches/ 3. 71 cm and the height is 1. 18 inches/ 2. 99 cm.
BrandHotop #ad
ManufacturerHotop #ad