Top 10 24V Solar Charge Controller – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. Renogy


Renogy Rover 30 Amp 12V/24V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery

Renogy #ad - Reverse protection: any combination of solar module and Battery, and equalization and LCD screen with programmable charging parameters. Automatically detect 12v or 24v dc system voltages innovative mppt technology with High tracking efficiency up to 99% and peak.

Electronic protection: overcharging, and short circuit. Charges over-discharged Lithium-Ion batteries. Error code detection for easy self diagnoses. Die-cast aluminum design for heat dissipation and the capability of measuring the battery's temperature and remote monitoring. 4-stage charging: bulk, Flooded, and lithium.

Conversion efficiency of 98%. Rs232 port allows the rover to communicate with the bt-1 Bluetooth module, which can pair with the Renogy BT Smart phone app. Customizable charging voltages. Compatible with various deep cycle battery options: sealed, boost, overload, gel, over-discharging, float, without causing damage to any component.
BrandRenogy #ad
ManufacturerRenogy #ad
Height2.85 Inches
Length9.37 Inches
Width6.81 Inches
Part Numberfit for Gel Sealed Flooded and Lithium
Modelfit for Gel Sealed Flooded and Lithium

2. SolarEpic


EPEVER MPPT Solar Charge Controller 40A 150V PV Solar Panel Controller Negative Ground W/ MT50 Remote Meter + Temperature Sensor PC Monitoring CableTracer4215BN

SolarEpic #ad - This 40 amp mppt solar panel charger works with 600w solar panel on 12v battery system and 1200w on 24V Battery. 150v max pv input allow this charge controller handles more Solar Panels Wiring in Series to minimize PV current, 5 x 12V Solar Panel Connecting in Series will be applicable.

Negative grounding mppt solar charge controller tracer4215bn, the Advanced MPPT Control Algorithm makes this 40 Amp MPPT Controller Tracking Efficiency higher than 99. 5%. A solid state relay is recommended if you are using a Power Inverter. Work with all lead acid batteries, sealed AGM GEL and Flooded Battery, User mode allows buyer setting their own charging parameters.

Rs-485 communication bus interface and standard MODBUS interface available to meet various communication requirements, Temperature Sensor and PC monitoring Cable Attached. Max solar panel 1560w, multiple load mode allow you set the load on/off in different situation.
BrandSolarEpic #ad
ManufacturerEpsolar #ad
Weight4 Kilograms
Part NumberTracer4215BN-MT50
WarrantyWe offer 2 years limited warranty

3. Renogy


Renogy Wanderer 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Regulator Compatible with Bluetooth Module

Renogy #ad - Smart 4-stage pwm charging bulk, float, and equalization increases battery life and improves system performance. Capable of charging over-discharged lithium batteries. Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.

Power source Type: Solar-Powered. Intelligent protection against reverse polarity, Boost, short-circuit, overcharging, and reverse current. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position. Integrated rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy BT smartphone app.

Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW. Integrated 5v 2a usb ports to charge USB devices. Backlit lcd screen displays system operation, diverse load control, and error codes. Compact in size makes it easy to install virtually anywhere. Optimized for a 12v/24v system; deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready. Then secure each cable by rotating the screws clockwise CW to the closed position.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.1 Inches
Length4.7 Inches
Width3 Inches
Part NumberCharge Controller
ModelWanderer 10 Amp 12V/24V
Warranty1-year material warranty

4. Autoday-3C


Vehpro MPPT 40A-100A 12V/24V Auto Focus Tracking Solar Panel Regulator Dual USB Port Charge Controller 100A

Autoday-3C #ad - When the battery voltage is low, the controller will automatically cut off the load from the system. Any problem please contact with us, we will try our best to solve your problem and make you satisfied within 24 hours.

This mppt controller has perfect soc function, control charge current, and supply power to the loads. Prevent the battery from over-charging, over-discharging and reverse charging to solar panels during nights. It is not suited for nickel metal hydride, AGM, lithium ions or other batteries. Mppt solar charge controller mppt10-60: compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%. If the voltage of battery is back to normal and the load will restart working. Note: the regulator is only suitable for lead acid batteries: OPEN, GEL.
BrandAutoday-3C #ad
ManufacturerAutoday #ad
Part NumberAutoday-771



ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V

ALLPOWERS #ad - Easy to use: comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc. Adjustable power rate with dual usb ports; 3-StageBulk, ABS, Float charge management and 4-Stage PWM charge.

Good heat dissipation: dual mosfet reverse current protection, it is better to shelter them for better heat dissipation, low heat productionALL electronic components generate heat when they are running, avoid direct sunlight exposure or damp place. Rated discharge current: 20a; usb output voltage: 5v/3a; battery voltage: 12v/24v auto.

Please notice the controller might be power off if the battery voltage is too low. Functionality: equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management. Mutiple electric protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection.
ManufacturerALLPOWERS #ad
Part NumberFBA_AP-OT-002-BBLU

6. Renogy


Renogy Adventurer 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller with LCD Display, Gel, Compatible with Sealed, Flooded and Lithium Batteries

Renogy #ad - The adventurer is a negative ground controller. Compatible with 12v and 24v system; Deep cycle Sealed, Gel, Flooded and Lithium battery option ready. Designed to cleanly flush mount on walls, providing a sleek, integrated look.

Any negative connection on the solar module, battery and load can be safely earth grounded as required. 5v 2. An included surface Mount Attachment allows for versatility in mounting. Smart 4 stage pwm charging bulk, float and equalization and temperature compensation increases battery life and improves system performance. Rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy BT smartphone app.

Intelligent protection against: reverse polarity, Boost, overcharging, short-circuit and reverse current. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. 4a usb port on the front display can be used to charge mobile phones, tablets, speakers, etc. Backlit lcd screen for displaying operating information and error codes.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.9 Inches
Length6.56 Inches
Weight0.45 Pounds
Width4.5 Inches
Part NumberRNG-CTRL-ADV30-LI
ModelAdventurer 30A Li 12V/24V
WarrantyNEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller.

7. Onesolar


60A MPPT Solar Charge Controller 48V 36V 24V 12V Auto Battery System,Max 150VDC Input Solar Regulator Negative Grounded with LCD Display for Sealed Gel AGM Flooded Lithium Battery

Onesolar #ad - Support 4 charging options: sealed, Gel, Flooded and User-defined, 12V 24V 48V Auto. Lcd display-clear to see operating data and working condition, Real-time energy statistics function with Multiple load control modes. Solar panel: fit for 900w12v;1700w24v;3400w48v;Max input Voltage:150V PV. Multiple protection against overcharge, short circuit, over discharge, reverse polarity, over load, over heat and battery under voltage. The tracking rate of maximum power is ≥99% and the maximum conversion rate is >98%.
BrandOnesolar #ad
ManufacturerTop One Power #ad
Height5.51 Inches
Length12.32 Inches
Width10.63 Inches



AMPINVT 60A MPPT Solar Charge Controller 12V 24V 36V 48V Auto,Max 150VDC Input 3400 Watts Solar Regulator

AMPINVT #ad - Lcd display-clear to see operating data and working condition, Real-time energy statistics function with Multiple load control modes, Mppt solar charge controller Display the daily power generation curve and current curve.

Support 4 charging options: sealed gel agM Flooded Lithium Battery,User-defined, 12V 24V 48V Auto. Solar panel: fit for 900w12v;1700w24v;3400w48v;Max input Voltage:150V PV. Multiple protection against overcharge, over discharge, short circuit, over load, reverse polarity, over heat and battery under voltage. The tracking rate of maximum power is ≥99% and the maximum conversion rate is >98%.
BrandAMPINVT #ad
ManufacturerTop One Power #ad
Height3.58 Inches
Length12.32 Inches
Width9.06 Inches
WarrantyManufacturer warranty for 365 days from date of purchase



EPEVER MPPT Charge Controller 20A Tracer2210AN + Remote Meter MT50 + RTS 12V/24V Auto with LCD Display for Solar Power Battery Charging Regulator System 20A + MT50+RTS

EPEVER #ad - With rs-485 communication bus interface and Modbus communication protocol. Monitor and set the parameters via mobile phone APP or PC software. Wide mpp operating voltage range. Epever 20a mppt solar charge controller tracer2210an + remote meter mt50 +temp sensor cable rts300r47k3.

81a. Accurately recognizing and tracking of multiple power points. 12v/24v auto identifying system voltage. Max. Pv 100v, 24v/520w, solar panel input power: 12V/260W, High tracking efficiency no less than 99.5%, negative Grounding. Real-time energy statistics function. Multiple load work modes.

Ultra-fast tracking speed and guaranteed tracking efficiency. Multiple load control modes: manual control, light On+Timer and test mode. Lcd panel display design, light on/off, dynamically displaying tool’s operating data and working condition. Compatible with lead-acid and lithium-ion batteries Battery temperature compensation function(only for Lead-acid battery).
BrandEPEVER #ad
ManufacturerEPEVER #ad

10. PowMr


10A Charge Controller 12V 24V Auto Load on 24Hours IP68 Waterproof Solar Controller for Lead-Acid Battery CMP-03 10A, PowMr Solar Charge Controller Waterproof

PowMr #ad - Easy to monitor the led indicator lights - the solar controller integrates three LED indicator lights: green Charge indicator, White BAT power indicator and Red Output indicator. Easy to mount directly to the frame of PV, the almost fuselage are surrounded by aluminium with heat sink to dissipate heat.

Intelligent 4-stage PWM charging. The pv can convert light energy into electric energy stored in batteries which will be protected by the solar controller. Our email is [email protected] Com. It is suitable for 12Vdc/24Vdc rechargeable batteries. All-round protection - the product also provides short-circuit, as well as dual mosfET Reverse current and low heat protection. Pwm charge controller - working mode is 24 hours.

Maximum power of pv is 120w for 12vdc system and 240w for 24vdc system, and the maximum current 10A. For any reason you are unsatisfied with our product, overload protection, over charge, open-circuit, just feel free to contact support for exchange or refund. Your satisfaction is our priority. In order to lengthen its service life, please do not overload. Input voltage between 15v and 41v - the 10a solar controller waterproofIP68 is suitable for Outdoor Use.
BrandPowMr #ad
ManufacturerPowMr #ad