Top 10 1/2 inch Irrigation Tubing Tee – Automatic Drip Irrigation Kits

As an Amazon Associate I earn from qualifying purchases.

1. iRunning

#ad

Drip Line Tees for Drip Sprinkler Garden Lawn Systems, iRunning 18 Pieces Drip Irrigation 1/2" Tubing Tee Fittings 17mm, Barbed Tee Connectors for 1/2 Inch Irrigation Tubing 0.600" ID

#ad
iRunning #ad - Wide applicationthese tee fittings for 1/2 inch sprinkler hose is ideal for garden, greenhouse, lawn, flower bed, farm, patio and other agricultural watering system. Package listit comes with 18 pieces barbed tee connectors, which let you connect your irrigation systems as you wish.

Easy to installit is easy to install without any glue, tools or clamps. Directly insert this irrigation tubing tee at the ends of the water pipe, the barbed ends can grab 1/2" tubing tightly for a secure leak-proof connection. Perfect match 1/2 inch irrigation tubingthese 1/2 inch irrigation tee fittings can connect to most of the standard 1/2" drip irrigation tubing from 0560 to 0600 inside Diameter ID.

Made of durable plastic materialthe drip line tees are made of high quality engineering plastics, so our irrigation tee connectors are durable, strong, water resistant, chemical-resistant and long-lasting than others. Note: please check the size of tubing carefully before purchasing.
BrandiRunning #ad
ManufactureriRunning #ad
Part NumberPD-17488

2. One Stop Outdoor

#ad

Barbed Connectors Fits Most Brands, Rain Bird 16mm .520 ID and Compatible Drip or Sprinkler Systems Tee 20-Pack, Irrigation Fittings Tee for 1/2" Drip Tubing, One Stop Outdoor 20-Pack

#ad
One Stop Outdoor #ad - Please note* - to prevent leaks or blowouts please ensure that the incoming pressure does not exceed 30PSI. Simple to install. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting.

Easy install - use these durable irrigation fittings to your connect 1/2" drip irrigation tubing. Fits all major brands of tubing 1/2", 16mm - Approximately. 520 id range. Secure and easy installation without glue, tools, or clamps. High impact Plastic Construction. 20-piece tees - three-way connector. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. These fittings are designed to fit 1/2" Inch, 16mm drip tubing. 520 id, if the tubing you are using is larger it can cause leaks! 99% of all leaks and blowouts are caused by pressure issues or tubing size issues.
BrandOne Stop Outdoor #ad
ManufacturerOne Stop Outdoor #ad

3. One Stop Outdoor

#ad

Fits All Brands 16-17mm Drip Tape AG Tubing 10, Tee, One Stop Outdoor 10-Pack Drip Irrigation 3-Way Tee 1/2" Universal Perma Connector Barbed Locking Fitting for Drip Tubing

#ad
One Stop Outdoor #ad - Incoming pressure: 30 PSI. Universal fit: fits all brands 16 & 17mm Drip Tubing! Material: constructed of highly durable UV and chemical-resistant materials to assure long life. Locking fit: barbed ends grab tubing for a secure leak-proof connection & the twist lock adds extra hold to the tubing for a secure connection every time! Use: 3 way tee fitting - connect and configure drip irrigation tubing to your desired layout. Allows creation of a custom layout for your planting area.
BrandOne Stop Outdoor #ad
ManufacturerOne Stop Outdoor #ad
Height3 Inches
Length5 Inches
Width6.5 Inches

4. FULAIERGD

#ad

FULAIERGD 10 Pcs Barbed Tee 1/2 inch Tubing 1/2" ID x0.6-0.63" OD 16mm to 1/4 inch Irrigation Tube Anti-Drop Quality Fitting Fits 13mm ID / 4mm ID

#ad
FULAIERGD #ad - Fits for drip irrigation fittings for pipes with an inner diameter of 1/2 inch and an outer diameter of 06-063” 16 mm tubing。. Pack:10pcs, high quality hard plastic fitting. Lock the tube with srew caps. For use with drip distribution Tubing, Drip Bubbler Tubing and emitter line. Dropproof design: secure and easy installation. Press the barb tee into tubing. Operating pressure: up to 45 psi, 1/2" Tube can be divided into 1/4" Tubes.
BrandFULAIERGD #ad
ManufacturerFULAIERGD #ad
Weight0.61 Pounds

5. Sparkfire

#ad

End Closures, End Cap Plugs Irrigation Water Hose Connector, Couplings, Sparkfire 42Pcs Drip Irrigation Fittings Kit Irrigation Barbed Connectors for 1/2" Tubing Switch Valves, Tees, Elbows

#ad
Sparkfire #ad - Simply push the tubing firmly over the barbs for a very tight fit that won't leak. Our drip irrigation barbed connectors are made of environmentally friendly anti-aging UV resistant high-impact plastic.

Save time and build your complete drip irrigation system at once. Ideal for garden greenhouse, patio, lawn, flower Bed, etc. Fits most tubing 1/2 inch: these 16mm drip irrigation fittings fit most brands of 1/2 inch irrigation tubing 16mm. 520-. 540" id. If you have problem about our item, pl feel free to contact us. Make sure the size and accessories are suitable.

Easy to install: irrigation hose connector is safe and simple to install without glue, tools, or clamps. Notes: before buying, you'd better measure the tubing and hose inner diameter. It is sturdy and will last for a long time. The irrigation fittings kit includes 2 switch valves, 8 End Cap Plugs, 8 couplings, 8 elbows, 8 tees, 8x End Closures.
BrandSparkfire #ad
Manufactureryaxing #ad
Height1.18 Inches
Length1.57 Inches
Width1.18 Inches

6. Hoomtry

#ad

8 Tees, Barbed Connectors for Rain Bird 16mm and Compatible Drip or Sprinkler Systems32 Pieces, 8 Elbows and 8 End Cap Plugs, Hoomtry Irrigation Fittings Kit for 1/2" Drip Tubing, 8 Couplings

#ad
Hoomtry #ad - Barbed ends grab tubing for a secure leak-proof connection; If your tubes is a wider 0560-0600", you need size 17mm. Excellent customers service: you are not completely satisfied with Hoomtry Plastic drip irrigation fittings set, just let us know, our goal is for you to be 100% satisfied with your purchase.

Confirm drip irrigation tubing size: these 16mm irrigation fittings are compatible with 1/2" drip irrigation tubing 16mm 0520-0540" id, noted: for 1/2 inch tubes, there is a big variation in internal diameters of these tubes 0520 - 0620", be sure of the sizes and buy fittings that "fit". Hoomtry irrigation fittings: the 1/2" drip irrigation tubing fittings served for connecting, making a turn, distributing water, and controlling the end ; Jump start your drip irrigation system installation with this set of essential components for building a maintenance-free drip system.

No tool required: the lrrigation fittings kit secure, tools, easy to install without glue, or clamps. No tool required: the lrrigation fittings kit secure, tools, or clamps. Barbed ends grab tubing for a secure leak-proof connection; Tips: The 16mm drip irrigation fittings works with any 1/2" pipe, Easy to install without glue, just need to heat the end of pipe to prevent it from sliding out.
BrandHoomtry #ad
ManufacturerHoomtry #ad

7. JOYPRO

#ad

JOYPRO 24 Pieces Drip Irrigation Barbed Tee Fittings for 1/2” Tubing 0.600”ID, Drip Tees 17mm Irrigation Tubing Connectors for Drip Sprinkler Garden Lawn Systems

#ad
JOYPRO #ad - Made of durable plastic materialjorpro drip line tees are made of high quality engineering plastics, strong, water resistant, so our irrigation tee connectors are durable, chemical-resistant and long-lasting than others.

Package listit comes with 24 pieces barbed tee connectors, which let you connect your irrigation systems as you wish. Note: please check the size of tubing carefully before purchasing. Easy to installit is easy to install without any glue, tools or clamps. Perfect match 1/2 inch irrigation tubingjoypro 1/2 inch irrigation tee fittings can connect to most of the standard 1/2" drip irrigation tubing from 0560 to 0600 inside Diameter ID.

Wide applicationthese tee fittings for 1/2 inch sprinkler hose is ideal for garden, flower bed, farm, greenhouse, lawn, patio and other agricultural watering system. Directly insert this irrigation tubing tee at the ends of the water pipe, the barbed ends can grab 1/2" tubing tightly for a secure leak-proof connection.
BrandJOYPRO #ad
ManufactureriRunning #ad

8. Rain Bird

#ad

Fits All 1/2" and 5/8" Tubing, Rain Bird EFT25-1PS Drip Irrigation Easy Fit Universal Tee

#ad
Rain Bird #ad - Requires 50% less force than competitor’s compression fittings. Constructed of highly durable UV and chemical-resistant materials to assure long life. Compatible with all 1/2" drip irrigation tubing measuring from. 580" to. 700" outside diameter. Quick easy Fit push-together assembly speeds installation. Universal tee fitting quickly connects three lengths of 1/2" Drip tubing in a "T" shape. Recommended operating pressure: 0 to 60 psi.
BrandRain Bird #ad
ManufacturerRain Bird #ad
Height16.88 Inches
Length5.5 Inches
Weight0.1 Pounds
Width6.25 Inches
Part NumberEFT25-1PS
ModelEFT25-1PS

9. Kalolary

#ad

16mm PE Pipe Lock Female Connector to 47 Pipe Variable Diameter Six-Way Adapter, Kalolary 10PCS Barbed Tee 1/2 inch to 1/4 inch Irrigation Tube Anti-Drop Premiun Quality Fitting fits 13mm ID/ 4mm ID

#ad
Kalolary #ad - Operating pressure: up to 45 psi, 8pcs per bag. Application : ideal for use with raised garden beds, residential, farm, lawn,greenhouse gardening and agricultural watering applications.

Suitable for most brands 1/2" size tubing and 1/4" drip line. 51 id to. 15 id. For use with drip distribution Tubing, Drip Bubbler Tubing and emitter line. Lock the tube with srew caps. One 1/2" tube can be divided into four 1/4" Tubes. Product includes: comes with 10pcs in a bag. Press the barb tee into tubing. Our barbed tee is made of high-quality plastic, We increased the wall thickness. Anti-drop design: secure and easy installation. High quality: high quality hard plastic fitting, recyle material. It is durable.
BrandKalolary #ad
ManufacturerKalolary #ad
Part NumberKalolary

10. Habitech

#ad

2 Elbows, Habitech Irrigation Fittings Kit for 1/2" Tubing, Barbed Connectors For Rain Bird And Compatible Drip or Sprinkler Systems, 6 Couplings, 6 Tees, 6 End Cap Plugs, 20 Piece Set

#ad
Habitech #ad - Simply push the tubing firmly over the barbs for a very tight fit that won't leak. Easy and secure installation without glue, tools, or clamps. This 20-piece kit includes 6 tees, 6 couplings, 2 elbows and 6 tubing end cap closures. These 17mm drip fittings are made with long-lasting and environmentaly-friendly regrind tubing plastic.

Keep extra parts handy for irrigation repair or expansion. Save money and time buying everything you need at once in this 20-piece Set. These 17mm barbed fittings work with half inch drip tubing from 0560 to 0600 inside Diameter ID. Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing. Ideal for use with raised garden beds, residential, farm, greenhouse gardening and agricultural watering applications.

Compatible with many types of rainbird, Orbit, Dig and Toro tubing as well as generic 1/2" blank tubing or drip lines. Jumpstart your drip irrigation system installation with this set of essential components for building a maintenance-free drip system. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting. The go-to fitting option for most contractors will always be the standard 17mm barbed insert fitting.
BrandHabitech #ad
ManufacturerHabitech #ad
Part Number4336408901
Model4336408901