Gold Label Detailing Vinyl Wrapping Accessory Kit | Plastic Squeegee with Felt Scratch Protector | Vinyl Slicing Tool | Retractable 30 Degree Blade Knife with 10 Blade Replacements

#ad
Gold Label Detailing #ad - 30 degree retractable blade - Breakable 7 piece blade at 30 degrees for a super sharp cut. 10 of replacement blades - Each blade has 7 razors. Once the blade is dull, simply break off the edge and move to the next blade. With a felt scratch guard installed, you wont have to worry about damage while installing.

4 item kit - vinyl squeegee, Vinyl Slicer, 30 degree retractable blade, 10x replacement blades. Felt edge vinyl squeegee - Safely remove air bubbles with this high quality squeegee. The included squeegee is the main tool you need to ensure a bubble free application. Simply pull the blade towards you and safely cut in a straight line without danger.

Gold Label Detailing Vinyl Wrapping Accessory Kit | Plastic Squeegee with Felt Scratch Protector | Vinyl Slicing Tool | Retractable 30 Degree Blade Knife with 10 Blade Replacements #ad - The essential kit for applying vinyl stickers and vinyl wrap. Vinyl slicer - easily trim vinyl off the roll with 1 hand using the slicer. This will essentially give you 80 fresh cutting blades. Also included is a 10 pack of replacement blades. The vinyl slicer is the best way to cut vinyl with just 1 hand. Its aggressive angle will ensure a sharp, drag free cut.

The 30 degree blade is the blade of choice for professional vinyl wrap installers.

#ad



RapidTac Rapid Tac Vinyl Application Solution, 4. Fluid_Ounces

#ad
RapidTac Rapid Tac #ad - Rapid tac application Fluid shocked installers by allowing them more control over their applications than ever before. Your bottom line will benefit from faster applications and less failures as well. For more information go to www. Spray surface again with Rapid Tac, peel backing off decal and place on wet surface.

Position decal and spray top of decal to minimize scratching. Ca. Use squeegee to remove fluid, using a good deal of pressure and working from the center out to the edges in all directions. Using rapid tac application fluid can often allow a large graphic to be installed with one person where two people were required to perform the same installation dry.

. We do recommend rapid prep as a pre-cleaner for surfaces that may have been exposed to wax, silicone, or other suspected contaminants STEP 2. Rapid tac application fluid's best feature is that it effectively breaks the surface tension of the adhesive on the film allowing it to flow and bond to the substrate more effectively than even a dry application.

RapidTac Rapid Tac Vinyl Application Solution, 4. Fluid_Ounces #ad - Clean surface thoroughly with Rapid Tac and a kitchen paper towel. Warning: this product can expose you to chemicals which is are known to the State of California to cause cancer and birth defects or other reproductive harm. Gov. Your customers and your reputation will benefit from higher-quality applications.

#ad



Knifeless Finish Line Vinyl Wrap Cutting Tape 10 Meter 32 Ft

#ad
Knifeless #ad - Warning: this product can expose you to chemicals which is are known to the State of California to cause cancer and birth defects or other reproductive harm. Makes vinyl installations faster and easier. Aids in application without bubbles. Allows for re-positioning of graphics. Bonds in as little as 90 seconds when squeegeed.

Knifeless is a tape that can be used to cut graphic film without a need of a knife. The tape is extremely flexible which turns in any direction conforming to even the tightest contours and edges of any surface it is applied to, or can be pulled straight creating precise cut lines. The excess tape removes cleanly leaving no adhesive residue.

Knifeless Finish Line Vinyl Wrap Cutting Tape 10 Meter 32 Ft #ad - For more information go to www. P65warnings. Ca. Gov. A clean sharp cut is made along the entire length. The tape has a visible high strength filament in the middle which is used to do the cutting.

#ad



VViViD Air-Tint Smoke Black Gloss Vinyl Headlight Foglight Transparent Tint Wrap Self-Adhesive 16 Inch x 48 Inch, 2-roll Pack

#ad
VViViD 8 #ad - Each vinyl sheet features our air-release adhesive backing making installation easy at any skill level. The tape is extremely flexible which turns in any direction conforming to even the tightest contours and edges of any surface it is applied to, or can be pulled straight creating precise cut lines. To make the vinyl conform to curves, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!

Made with automotive grade cast vinyl, these tints are 80% tinted smoke or 20% VLT. Ideal for any headlight or tail light on any vehicle. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape. This film is also self healing and scratches will go away with heat! simply cut the vinyl to shape, simply heat with a heat gun or hair dryer, stretch and apply.

VViViD Air-Tint Smoke Black Gloss Vinyl Headlight Foglight Transparent Tint Wrap Self-Adhesive 16 Inch x 48 Inch, 2-roll Pack #ad - Lastly, and apply it to the surface. It is super conformable with heat. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights. Note: make sure to measure your headlights and order enough vinyl to wrap tHEM. A clean sharp cut is made along the entire length.

#ad



3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll 164 Ft for Stripes and More

#ad
3M KNIFELESSFLT164 #ad - Use for most wrap applications Conformable around bumpers, door handles, mirrors, etc. Translucent tape so you can see exactly where your line is and reposition the cut line as needed. Absolutely no residue! The adhesive is acrylic based which will not eat through plastic like other tints on the market. To make the vinyl conform to curves, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!

Made with automotive grade cast vinyl, these tints are 80% tinted smoke or 20% VLT. The excess tape removes cleanly leaving no adhesive residue. P65warnings. Great for turns and corners. 3. For more information go to www. The tape has a visible high strength filament in the middle which is used to do the cutting.

3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll 164 Ft for Stripes and More #ad - Ca. Gov. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights. Note: make sure to measure your headlights and order enough vinyl to wrap tHEM. It is super conformable with heat.

#ad



RapidTac RP-50045-2 Adhesive Prep

#ad
RapidTac RP-50045-2 #ad - This is the only film on the market that can wrap any sHAPE. Lastly, and apply it to the surface. Preparation is the key to success. 3. A clean sharp cut is made along the entire length. The tape is extremely flexible which turns in any direction conforming to even the tightest contours and edges of any surface it is applied to, or can be pulled straight creating precise cut lines.

To make the vinyl conform to curves, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple! Made with automotive grade cast vinyl, these tints are 80% tinted smoke or 20% VLT. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights.

RapidTac RP-50045-2 Adhesive Prep #ad - Note: make sure to measure your headlights and order enough vinyl to wrap tHEM. Wax, grease, oil and silicone residues are the number one reason for both paint and film application failures. Rapid prep easily and safely eliminates these and other contaminants ensuring a successful paint or film application, and a happy customer.

Vvivid air-tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. Step 1. They include an air-release membrane which allows you to install the tint dry without installation liquid Ready to use out of the box! With an ever growing need for a safer workplace, we developed a pre cleaner that not only works great, but is safe to use.

#ad



VViViD Air-Tint Dark Black Headlight Taillight Tint Air-Release Vinyl Wrap Film 17.75 Inches x 60 Inches Roll

#ad
VViViD FBA_vvblackheadlighttintbulk17.75 #ad - It is 100% chemical safe, and will not eat through headlight coatings or damage your lights. Note: make sure to measure your headlight tints - this pre-cut sheet is 1. 49ft x 60". It is super conformable with heat. 3. Lastly, and apply it to the surface. Vvivid air-tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials.

This is the only film on the market that can wrap any sHAPE. This is the only film on the market that can wrap any sHAPE. A clean sharp cut is made along the entire length. The tape has a visible high strength filament in the middle which is used to do the cutting. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple! Makes vinyl installations faster and easier.

VViViD Air-Tint Dark Black Headlight Taillight Tint Air-Release Vinyl Wrap Film 17.75 Inches x 60 Inches Roll #ad - Aids in application without bubbles. Allows for re-positioning of graphics. Bonds in as little as 90 seconds when squeegeed. Knifeless is a tape that can be used to cut graphic film without a need of a knife. The adhesive is acrylic based which will not eat through plastic like other tints on the market. They include an air-release membrane which allows you to install the tint dry without installation liquid Ready to use out of the box!

#ad



VViViD Vinyl Camouflage Pattern Wrap Air-Release Adhesive Film Sheets 1ft x 5ft, Snow Camo

#ad
VViViD #ad - Makes vinyl installations faster and easier. Aids in application without bubbles. Allows for re-positioning of graphics. Bonds in as little as 90 seconds when squeegeed. Knifeless is a tape that can be used to cut graphic film without a need of a knife. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape.

This film is also self healing and scratches will go away with heat! simply cut the vinyl to shape, stretch and apply. Great for turns and corners. For fast, easy, quality installation of vinyl graphics with no bubbles. Vvivid air-tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials.

VViViD Vinyl Camouflage Pattern Wrap Air-Release Adhesive Film Sheets 1ft x 5ft, Snow Camo #ad - The adhesive is acrylic based which will not eat through plastic like other tints on the market. 3. Vvivid's camouflage vinyl offers the authentic appearance of military-grade camouflage while giving your vehicle year-round style. Perfect for blending into the surroundings during hunting season, but also stylish and attractive all year round.

Vvivid car wrap films conform to contours and can stretch up to 200% 30% or less is suggested for optimal performance, making installation a simple process, even for beginners. Can be easily applied to any non-porous surface with only a heat gun and squeegee.

#ad



WrapCut, Edge Cutting Tape, 1/8-Inch X 200 Feet, 1 Roll, 883662001260

#ad
WrapCut #ad - They include an air-release membrane which allows you to install the tint dry without installation liquid Ready to use out of the box! Lastly, and apply it to the surface. The adhesive is acrylic based which will not eat through plastic like other tints on the market. Ergonomic, protective plastic spools for easy handling and application.

It is 100% chemical safe, and will not eat through headlight coatings or damage your lights. Note: make sure to measure your headlights and order enough vinyl to wrap tHEM. Produces impressively straight cut-lines. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape.

WrapCut, Edge Cutting Tape, 1/8-Inch X 200 Feet, 1 Roll, 883662001260 #ad - This film is also self healing and scratches will go away with heat! simply cut the vinyl to shape, stretch and apply. 5 mm 1/8 nominal Width. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights. Note: make sure to measure your headlight tints - this pre-cut sheet is 1.

49ft x 60". Vvivid camouflage vinyls lend an authentic military Camouflage appearance to any surface, whilst adding a layer of tough, durable weather-proof protection. Used to make precise trim lines through many printed vinyl and protective film products.

#ad



VViViD XPO Black Carbon Fiber Car Wrap Vinyl Roll Featuring Air Release Technology 17.75 Inch x 5ft

#ad
VViViD . #ad - They include an air-release membrane which allows you to install the tint dry without installation liquid Ready to use out of the box! Perfect for blending into the surroundings during hunting season, but also stylish and attractive all year round. Vvivid car wrap films conform to contours and can stretch up to 200% 30% or less is suggested for optimal performance, making installation a simple process, even for beginners.

Can be easily applied to any non-porous surface with only a heat gun and squeegee. Conformable around irregular shapes and angles. The excess tape removes cleanly leaving no adhesive residue. This premium automotive vinyl by vvivid vinyls is specially engineered for DIY'ers. Easily repositioned or removed with no risk of chipping factory paint.

VViViD XPO Black Carbon Fiber Car Wrap Vinyl Roll Featuring Air Release Technology 17.75 Inch x 5ft #ad - Vvivid vinyls feature air channel release technology, allowing you to smooth it onto a surface and eliminate air bubbles for a perfect finish. Installs in a fraction of the time it would take to apply a new paint job, and at a fraction of the price. They include an air-release membrane which allows you to install the tint dry without installation liquid Ready to use out of the box!

Adhesive : solvent-based, repositionable, permanent adhesive. Makes vinyl installations faster and easier. Aids in application without bubbles.

#ad



VViViD Black High Gloss Realistic Paint-Like Microfinish Vinyl Wrap Roll XPO Air Release Technology 1ft x 5ft

#ad
VViViD #ad - Great for turns and corners. For fast, easy, quality installation of vinyl graphics with no bubbles. Vvivid air-tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. With a micro-finished surface, the gloss films are much easier to clean, maintain and install.

Conformable around irregular shapes and angles. They include an air-release membrane which allows you to install the tint dry without installation liquid Ready to use out of the box!5 mm 1/8 nominal Width. Produces impressively straight cut-lines. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights.

VViViD Black High Gloss Realistic Paint-Like Microfinish Vinyl Wrap Roll XPO Air Release Technology 1ft x 5ft #ad - Note: make sure to measure your headlights and order enough vinyl to wrap tHEM. You can wax, polish and use almost any chemical as you would on car paint. Ergonomic, protective plastic spools for easy handling and application. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights.

Note: make sure to measure your headlight tints - this pre-cut sheet is 1. 49ft x 60". The tape has a visible high strength filament in the middle which is used to do the cutting.

#ad